Hi guys, new dc5 owner here. Bought the car yesterday, few minor stuff to be done but other than that shes perfect. One of them is that my Rpms dont work. My speedo, odometer, fuel and temps are working. I ran the diag mode where the needles recalibrate and the rpm one was working as in went up and down but during drive or idle nothing. I was thinking of checking for voltage on the rpm wire at cluster but not sure what value its supposed to be and if the needle is working during diag then it wouldnt be that would it? Also vtec engages fine. Not sure if it could be the speed sensor?
Thank you.
Thank you.