Recent content by dave h-b

Just as Stoo says its just missing bits really, unless someone has really mucked up bad. Stoo fitted his himself, maybe you should get one and hire Stoo for a few days :xgrin: CPL prices are steep, but so are a lot of tuners in the UK atm. If you can pick one up yourself (Stoo is right again)...

290 with the SC and the turbo on the EP3 had 318.

:xgrin: alright clever clogs, let me rephrase 'if only we all had a top garage so close'. Would that be ok? :xaiweb5:

I understand what your saying, its just kinda nice to watch the numbers and see them change :xgrin: . I have only ever had 2 kpro'd cars, but both times the map was released to me, just did not know others would lock it down, but i can understand why.

Did you ever manage to get them to release the map to you? Pretty wierd of a tuner to not allow you access to it. I know its an old thread, but came across it when i was searching and i am just interested to know what they did.

Well i have only just bedded in the clutch, so planning on having a good blast this weekend depending on weather and if we can find a closed road. So far i will say that its the same old story. The SC is always on, so fuel consumption is worse that the EP3 turbo, but the power is instant. The...

If only we all had a top tuner so close, nearest one to me is nearly a 2 hour drive :xaiweb4:

Some people just don't trust them, like all tuners some customers have had problems, although they never really seem to say what problems they have had. CPL have just fitted a JRSC kit for me, along with a whole list of parts and everything works great. The nice thing with CPL is Guy(owns it)...

I decided, maybe against better judgement and advice :xprotest: , to give it a go. It does fit under the console using the original holes just with a bracket instead of bolting straight in the original holes. Its a great piece of kit and i am using it with their shifter cables. You can adjust...

Hellooooo, Just wandering if anyone has any first hand experience with one of these? http://www.hybrid-racing.com/store/drivetrain?p=2 Thinking of trying one out with the shift linkage sets they do with them as both have got great reviews from our lost nation east across the water. I know...

There was a similar thread here: http://www.itr-dc5.com/forum/index.php?/topic/25140-flaking-window-trim/ I know it started off just being the metal area at the bottom, but i think the Bonson ended up going all around his door, maybe you could do the same with just some Matt black as opposed...

I have mine fitted the other way round, so squeal going forward, lol.

Hi Firthy, always best to check with the manufacturer when bedding in new discs and pads. Due to the heat treatment that some discs recieve during manufacture, some do need to be heated up upon first use to help with bedding in, such as Stoptechs, but for Dixcels its a case of gentle driving...

Indeed it was my end mate, sorted now, like the class shown on the site, not too much in your face just very clean. Where abouts are you based, i noticed it says South East just wondering how far down :)

Let us know what you find as may save some people money in the future if its a clean and replace job ;)