Search results

Seen people ask a few times for a guide on doing this job and if it can be done in-situ or not. I've been doing a lot of work around that area recently, and looking at it I thought it must be doable in-situ without too much work. I'm always up for a challenge so decided to smash it out on...

Just thought I'd post this up for reference in case anyone needs to replace their wheel hub, outer CV or bearing. For info my driver's side driveshaft was seized into the hub, and wouldn't come out despite heat and a hammer, and even my 10 tonne press. Ended up getting it pressed out by a local...

Hi all, Anyone know the part number for the gearbox mount bolt (squared in purple)? Slightly rounded head on mine so want to replace it when I take it off next!

Does anyone know what the standard wheel studs length is out of the hub on the DC5? Had a search through old threads but couldn't find anything specific, and Tegiwa do different sizes Sent from my GM1913 using Tapatalk

Started smelling the familiar sweet smell of coolant in the last few days and losing about 500ml every couple of days. Looks like it's leaking somewhere around the top rad hose or battery tray side of the radiator. Just wondering if there is a common fault to save taking it apart to...

Hi all, Will throw an introduction thread up soon, as have just imported a car but spending every free minute doing bits whilst waiting for that V948 to turn up! I‘ve wetsanded and polished my headlights twice (800/1000/1500/2000/Megs Ultimate Compound) but I can‘t get them to come up clear...

Dear Members, Some of you may have difficulties to access the site since last night, as it has been moving back to UK (from US). You should notice the difference in speed as the server is now based in the UK. Sorry for the inconvenience that causes you. Regards, Andre

Hi Folks I am going to move the forum to a new server due to the down time of the current dedicated server is unbearable. I will change the DNS on Saturday night and it might take up to 6-24 hours to update. If you found you are still going to the old server on Sunday night then you might need...

Thanks to Dave at Steel Honda kindly offering us the RSX workshop manual for reference. The manual is in PSD format, the download size is 38mb. Click here to download Below are the table of contents so you can see if this is what you are after Table of Contents 1 Table of Contents 2...

http://www.honda.co.jp/CIVICTYPE-R/prot ... estdrives/ 4 doors.... :xaiweb1: no thanks...

This is a test post that only visible to Mods & Admin only. You'll see an extra check box called "Staff Only" under the "Notify me when a reply is posted" and "Delete this post".

The original post from sxoc forum. coolant spilt at the wrong place... http://www.jackals-forge.com/lotus/movi ... _crash.wmv http://www.bookatrack.com/-PFexboyracer ... video/mpeg BAT Thread http://www.bookatrack.com/-ff?5&fram&&&&1

Hi all received an email from Jean at belgium & his kind invitation. i know some of you are planning to make another trip to Spa later this year. so here you go: =============================================== Good afternoon, First of all, congratulations for your site and your forum. They...

Hi all, i've added an ability to add an attachment to the post. currently, if you want to show a picture in the post. you've to upload it somewhere and place the link back to the post. with the "add an attachment" (see attached image), you can now attach a small file to your post like this...

Hi all, I've managed to convince Simon Mason to take some of his spare time to give us some of his professional advise on race circuit driving. (simon, thanks) If you've any questions about circuit driving then you are welcome to post them here. I'd appreicate if people can keep their...

Hi all I am pleased to announce the new Gallery page. Here are some guidelines and rules for the gallery page: - You are welcome to share the details and pictures of your Honda Integra DC5 Type R or Non-Type R with others by uploading your car pictures to the server via the car profile page...

just in case someone missed it... http://www.itr-dc5.com/forum/viewtopic.php?p=6424#6424

http://www.uktrackdays.co.uk

just want to share some good stuff with someone who want to drive quick & safe around the circuit. Here's the website: http://www.simonmason.com simon is a regular instructor at Bookatrack.com in 2004. this is one of the reason why i like to go on a track that organized by Bookatrack. 8)...

UK Circuits and nearest fuel location - http://www.k9motorsport.co.uk/pg-CT.htm