Search results

So I found this topic for the fn2... http://www.civinfo.com/forum/how/64072-how-use-tap-into-fuse-box-option-connector.html And was wondering if the Dc5 had similar blank spaces on the interior fuse box? I've been looking at getting a dash cam and this would be an ideal way to hardwire it...

Want to get something carbon skinned, does anyone know a good chap that can do this for me? Thanks :)

So I posted a little while ago about a kangaroo-like car. It was originally remapped on a dodgey TPS, which has been replaced with a K Tuned unit. The car then went back to Romain to be re-remapped.... And it's a little better. He tuned it on the rollers, and then tweaked the town driving out on...

Help :) I'm looking at a new set of wheels, they are: 17 x 7J ET35 17 x 8J ET41 As far as I've searched, the 8J pair will fit, but can't find much info on the 7J pair. Offset too low, will they fit on the rears? Thanks

I bought a Hybrid Racing rail but it fouls the Jmerc bracket on my teg :( Anyone know of any aftermarket rails that are the same length, if not shorter than the OEM rail? Cheeky photo for you all too :)

Help guys!!! Today I changed the top 10mm bolt on the power steering pump, the one that connects the hose to the reservoir (needed a flat allen head one, old one hit the bonnet) I did not pull the pipe off, just the bolt. Started my car up a few hours later, drove off the drive and the...

I recently had my car re-mapped (k100) at a respected place... It made great power but isn't quite running 100% since. The car had a few good modifications fitted the same day. The problem is almost random juddering / kangarooing in random gears at random speeds. It only happens when you're...

I think the bottom 'teeth' have been trimmed off, but not sure what car it come from? Thanks

Looking for a respected garage to take care of my service now Stevie is no longer about :( Willing to travel but closer to the Oxford area the better. Thanks!

So I'm finally getting round to painting my wheels tomorrow :) Now do I go the same, white car white oem wheels.... Or do I be adventurous and try something different? I can mix almost any colour, hmmm.....

Hey guys. Does anyone know the correct belt to use with the AEM power steering pulley only? Not using the alt or crank pulley. Thanks :)

http://www.ebay.co.uk/itm/OBX-Red-Power-Pulley-Kit-02-06-ACURA-RSX-TYPE-S-3pcs-/150849648417?pt=Motors_Car_Truck_Parts_Accessories&hash=item231f56f721 Do these things fit the dc5? Only really interested in the top power steering one because I have another little project in mind :xgrin: Thanks!

Little help please guys. My engine management lights came on a while ago, and went straight out. This week its done it again, but more than once. I used the paperclip diagnosis and the light gave me the codes 13, folled by 41. I also noticed the ABS light flashed constantly when diagnosing...

I had the old problem of stiff gear changes at high revs... Did my research on here and it was diagnosed as the clutch being worn (still on the original at 57k) I rang up several local garages, and my local honda 'specialist'... They told me its ridiculous to change the clutch for this reason...

Teggy has learnt a new trick :lol: At about 4k revs, when you lift off the drivers footwell seems to be making a buzzing rattle! Sounds like a piece of trim or something plasticy? It's not that annoying, until wierdly you have a passenger and it's twice as loud!! Anyone had this before? :lol...

Hi guys! Wierd thing happened to me on the way home from work today, the EML light briefly came on.... I had my lights on, wipers on fast, heaters on quite hot, ipod on the dvd player quite loud, and I was doing 30mph in 5th gear (following traffic, was about to shift down...) Anyway as I hit...

My old inlet mani is off the car, and I've just noticed a slight build up of 'soot' inside it. Could be oil or carbon maybe? The car has done about 55k miles is this normal? It's not excessive, just thought I best be safe and ask!

Been quoted £240 for a service, with me supplying the engine oil. Does that seem reasonable? Included gearbox oil change, spark plug change and a new oil filter

Okay so I try and keep my engine bay clean. I give all the carbon / painted bits a spray with quick detailer with each weekly wash, and wipe any bits I can get a microfibre too. But now I'm using the teg more, some bits of dirt are getting more stubborn, like around the abs unit, powersteering...

Took the fronts off this morning so I can paint them Yak! I made up some little stoppers at work, but not sure how well they've sealed. Seems to be a drop of two leaking every now and again... When the calipers and new pads go back on in a weeks time, will I end up bleeding all 4 if...