Search results

if you are just wondering, how it would look, then i give you an idea orange parklights: orange sidelights: and with a bright low-beam: hope that helps you to give an idea. or anyone else! :)

i want this bumper, but yes, the ground clearance can be a issue on bad roads! :D

actually, it seems like it is bubbling from the top, it has been sprayed dark gray if to look close.. cor coverup or ease of mind.. but that all is just temporary! i just am on my leaky trunk drying and i definetly dont want to get it that far! lucky i have sounddeadening laid out there on the...

but where from the water arrives? it looks like coming in from the right side..

that has helped every time! :)

225/40/18 is what i use :)

i wonder.. for a carbon fibre trunk, a 3M double sided tape or the sticky foam? what would be the best? the CF trunk flexes more than the metal trunk ofcourse..

wait, it is just foam under there? i had double sided tape under it. took it off for cleaning and buffing the carbon trunk, but now thinking if i put it with double sided tape back or something foamy..

why not just buy a RSX cluster and transfer the speedo part over to the ITR cluster?

yes! its still orange. even if you remove or not the orange lens, the bulb what looks just white or chrome produces orange/amber light as needed to indicate. i just swapped this out because in the rear i have the same LED and in the mirrors i have LED aswell :)

take the lens out and put clear looking amber LED in the socket. just like i did, but i did not removed the orange lens. used this LED and resistor:

i just installed a magnaflow exhaust - https://youtu.be/oZSmcabT5BI not too loud, just OK for me :)

i have lowered the ride height about 80mm and i could say it is pretty good. but it is good to measure the car to get a accurate lowering idea. the ride height should be 1400mm from the top! :)

if i remember correctly it was the work+new lights+shipping to estonia = ~500 euros and the 3M film was a extra 50euros in a local 3m decal-making place. i did not wanted the HID he provided, because here the HID bulb (china) costs 10eur per bulb and the aftermarket ballast for the xenon light...

i have the projectors done by rsxretrofits and the output of the light is just amazing compared to my halogen depo lights, what i use for MOT :D here they are, how i ordered them: but the bad thing is, that they are without any E or DOT marking, so, i dont know how they will go through UK...

dont you use these there in winter? but then maybe in UK winter is reasonable to use the studless wintertires like Dunlop SP Ice Sport:

Actually - NO Here(in Estonia) for example if to use winter tires with 0 degrees celcius, and if the road is clean, the studs in the tire make it slippery! i use Good Year Ultra Grip Ice Arctic. But if there is snow and -20 or -15 degrees C then it is nice!

where you put the high's? in the OEM spots? Prima is hairly OK compared to the more expensive Voce series. but do you put any lightweight noise dampening in the doors/rear too?

i went with the BWR rad and hoses, worked out pretty good and the welds are good too!! my rad was cracked too.

i would reccomend some softer seal for the covers so that they wont rattle. but it sounds hollow because there is just nothing in the rear for deadening. if you put some lightweight sound deadening, it is all good, like STP Gold AERO. try it out and it is well worth it.