Search results

I also had all shafts and bearing replaced in my box by performance tek and would recommend going Automek for the work [emoji6]

I had a similar issue a while back... May be worth checking the fuel filler pipe. It began with a subtle smell of fuel inside the car for quite a long time until one day I filled the tank totally full and parked on a hill overnight, came out to find fuel dripping down the rear arch from behind...

Did you eventually get a hold of some ?

Sealant then wax mate ... Always put the longest lasting product on first and then the second product becomes a sacrificial layer, which will protect and make the sealant last even longer

Probably better to put actual lock graphite in it .... Wd40 may stick to any dirt inside and make it even worse.

No worries [emoji4]

Discount code is BF15

I recently filled my tank full noticed when I got home a slight fuel drip, had it in at my local garage today and he said there's two metal hoses, one thick and one thin that are corroded behind the left wheel arch and that it will be fine if I keep the tank below three quarters but he can't...

Mines made a kind of fuzzy whirring sound before I had it sorted.... However I was advised before having the work carried out that it wasn't a big deal and he had never seen one that had actually let go and failed completely but I wanted it sorted for piece of mind and also so that I knew there...

Input shaft bearing ?

Thanks [emoji3]

Can't seem to find the thread with the list of part numbers so apologies for this but I want to add to an order with Burn Motorsport and need the part numbers for both left and right rear light brackets for a pre facelift. Thanks, Ben

As Erm said, give the fresh paint a couple of months to settle in and then either machine polish the whole car yourself or get it to a professional who will also be able to apply a long lasting sealant to protect the paint. If you get that done I don't think you'll need anything to tone down the...

I hope not, I was going to order some when I get paid [emoji20]... Hopefully someone will know.

http://www.nengun.com/honda/oem-parts-integra-type-r-dc5 £123 each

The ones on eBay ?

My mate is currently in the USA working.. I'm going to ask him if it would be OK with him and the hotel he is staying in to have them delivered there to avoid the crazy price for delivery to the UK.. If anyone else wants a set I can get more details and post on here if they like ?

Exactly this, not to tar all mobile companies with the same brush but generally speaking the quality of repair and finish left behind are not 100%! Also over time the "quick fix" can come off leaving you back at square one. Go to a reputable body shop and have it done properly, it may cost you...

Had an issue a while back when I ordered Piaa wiper blades, took two months to receive them but that was because they no longer stocked them and had to find me a set.

I had exactly the same problem as you have described recently so phoned up Dave at steels honda. For all four bearing and seals it came to just under £300, then cost me a further £400 in labour, in my opinion it was money well spent... No more rattling or whirring sounds which were driving me...