Search results

At the minute it's in my head and still work in progress 😂 I've done all the under coating bar boot floor back and suspensions ready to go on. Mugen lip for bumper to make fit which will be fun. Thinking of slight 20mm wider and lost in the upper body line. Maybe loose the curve that runs...

I'm panel beater so attacked it with air saw and wire wheel. There almost built up hoping to get boot floor welded up and back on 4 wheels by Sunday, then fun starts with wide body kit 😬 Just got to fit hard race to trailing arms and maybe sand them for extra coat not happy with...

Doing my polybush kit and struggling to get the 2 arms out of the trailing arms. Is it a case of brute force or is there a knack that I'm not getting ? Lol

Cheers mate??

So doing a complete rebuild of my suspension starting with the back, all going fine till I had to remove the abs sensors ones ok the other is done for 😭 Anyone know if these are the same as ep3?

Been there tried that. Don't fit mate honest lol

Can I down load onto iPad? Interior is stripped apart from dash n carpet. Stupid foot rest! Happy with day's work yesterday just pulled up to unit gotta change rear calipers on nans mg zr (yeah my 80 year old nans zr! 😂) Once I've done them I'm aiming to get started on the rest any advise on...

Ok so cars now in unit and I've started getting things apart and can't wait!!! Full rebuild of the body and tempted at doing few bits on engine. What I was wondering is how helpful a ep3 Haynes book would be? Say for torn settings on suspension and I ashume the engine would be the same. I'm...

So sorted it all out! Had two fuses under the dash that blew and made speedo not work and alternator not charge the battery. Turns out the o2 sensor hit the chassis as it's on a decat manifold with an extension on it. All sorted now but think vss is gone so got one ordered through work and will...

Well all fixed apart from vss ( cheers for the heads up jimmer!) Well was until I send over speed bump and same two fuses blew under the dash. Gonna have a look under car on a ramp at work must be a earth there or something x

Ok so fixed the alternator, was 2 blown fuses under dash and bad earth. Gonna fix air temp wire that was rubbing on battery brace (tegiwa hose too big/long) so can get rid of that code and see if o2 sensor still flags up then I'll see if speedo still not working. Can't see the converter for love...

Reverse lock has gone to so if your not careful will go into reverse not 6th. Having 5.4 and longer 6th done aswell so box is coming out anyway. Where would speedo converter be if it's on the box? And also how many earths am I looking for and where?

Working way through them. Apparently common problem on some hondas but think more likely earth issue?

Ok plugged obd in and shows few things. O2 sensor which recon is a broken wire where I have a spacer on decat. Misfire probably from battery dying and p1298 which is a electric load detector in the fuse box! Honda a shut now so will have to wait till Monday which sucks but making progress!!!!

Walking to work now to pick up tools and new battery 😞 Basically got angry and pulled off and wheels spun up. Emil light and battery light came on, speedo and v etc stopped working and half way down the road realised 5th won't engage! Was gonna lump it to work but battery died so used booster...

Ok so wasn't sure where to put this so thought I'd try here. Hands up I was being a d#%k and done a angry pull away when an Aston Martin decided he owned the road and pulled out on me. Now I've lost 5th gear and my battery isn't charging and speedo not working 😭 Booked into cpl next Monday...

I work at a bodyshop and it's as John said normally around the 60% of the cars value. If there's a lot of parts and car rental during repairs (in like for like courtesy car) that comes into it. Need bit more than just a bumper to write off a 18k car Insurance company's are writing cars off at...

They sent over an explosion of the whole rear so circles it and will be here today. start it after work till 7 then I'll have to go in at 3-4 in the morning to go the rest. Front track rod ends stuck too so couldn't get me front coil overs in last night Aaaahhh Lucky I have some new ones anyway...

I'm 99% sure they are hoping he knows how to search chassis number or know some who can he's an idiot and it's a local Honda dealer up the road from work. Looking like I'm gonna have to belt sand the shock and bearing off to get old shock out :( Thanks mate

Need help boys and girls!! Changing to coilovers but one of the rear suspension bolts are seized inside the bush of the rear shock. One that goes through the suspension leg and bottles it too the rear trailing arm, are these the same as an ep3? I can get one from Honda ordered tomorrow but the...