Search results

Hi guys, Trying to fit a billet mount and going by the data I can find from Honda the 3 bolts for the drivers mount are M10x30 but I am unsure on the pitch. Innovative mounts website mentioned 1.25 but I've tried and it doesn't feel right, goes in a few threads then tightens so I don't really...

Delete

I don't mind using JD weld to hold a bolt in place for the strut brace but because you have a snapped camber bolt I think the best thing to do is drill it out and get a replacement or ask Meister R for the bolt size. I wouldn't like to see anything fail on you when driving!

Borrowing this from clubrsx as I couldn't find anything, good DIY guide https://www.clubrsx.com/threads/broken-front-strut-bar-bolt-fix.420011/

Sorry to revive an old thread. Anyone actually replaced one of these studs and knows the size? I can only find out a little bit when googling any someone mentioned using "grade 12.9 steel bolt" thats all Thanks

Thank you

Hi everyone, I was wondering if anyone had the part number for a replacement coolant overflow bottle, I think mine is leaking as I topped it up with water and after driving home from the shop I checked under it while the car was running and I could see a slow drip from the hose. Unsure if its...

Thanks, fitted a new cap and going to see if it fixes the issue

Thanks for uploading info, will they replace using OEM seals/trims?

Hi everyone, Just wondering if anyone has had a Mishimoto cap fail? The reason I am asking this is that I have noticed coolant sitting on the fan shroud and around the top of the radiator hose but there is no leak when it's running, no puddle under the car... Anyone had an issue with the...

Thanks for the quick reply, couldn't see any data for the pitch for that p/n on lings.

Hi guys, I was wondering if someone can help me, was replacing the rear anti-roll bar bushes and both lower threads are flat. They were loose when removing, suspect it was the last garage that replaced them years ago. Just wondering what size of tap I will need? Thanks

Hello, I am about to replace a leaking seal on my box, I've been told that these need to be changed in pairs or it will heat up or something and the other will bust (bs prob sales pitch) just bought a pair from Tegiwa anyway Just wondering if I can get away with fitting just the 1 Thanks

Thanks, wasn't too sure on the quality. We managed to get it setup proper on the hunter, there was a setting for Honda Integra (Australia/New Zealand) 2002-2006 which is definitely the DC5 as the other model was Integra 1996-2001 (DC2)

Would be interesting to see other peoples print outs with springs alone tbh I might just get yellow speed coilovers along with rear adjustable arms and get a FRSU

I dont have any camber bolts or adjustable arms on the rear, just stock oem rear arms.

Hello everyone, wondering if someone can help with my setup alignment (only toe) as it doesn't feel right after fitting new track rods and recently having the alignment done It's on eibach lowering springs and that's all, it just feels like I'm always having to correct the wheel when driving...

Thanks, wasn't too sure and are you running them straight off the head unit?

Hi all, As the title says I seem to still have this issue with a vibration when driving around 75-80mph So far I replaced - Drivers side shaft (new one from DSS) - Passenger side Outer CV (Blueprint) - Passenger side Inner CV (Honda Genuine) - Balanced wheels What is the odds of the...

Its probably been asked 100 times but I've run into this issue when trying to fit some Vibe Slick7 6.5" speakers (even tried them in the rear and they wouldn't fit) The reason I went for 6.5" because it had some old alpine or pioneers (front & back) very shallow speakers and 1 is blown so its...