I'm building a Dc5 for the track. I was asking for some help on different topics and a guy said I should do a build thread. So here goes. Good way for me to keep track of progress and any one interested to keep watch.
The car is a 06 integra. So far I have the interior stripped
Full roll cage
White line Real sway bar
Rear camber control arms
Yellow speed coilovers
Area motorsport Sperical track rod ends
Rota wheels
Starter control panel
Pbs brake pads
Hondata air box mod
Air con delete
Spent most of the wend getting the control panel ready. I ordered some carbon plastic of ebay and cut it down to size where the radio sits. Using some 2.5mm guage wire I set out getting the push start button working. I have put in an Fia kill switch, and got It going first try. Time consuming getting the panel to fit right anf wiring it for the frist time.
Things coming up next, full 3in exhaust, full dash removal, interior painting, plumber in fire extinguisher. Geometry set up. Bonnet boot pins, final drive m factory, hondata ecu, mapping.
Hopefully this thread might be of some help to both, me as I maybe hit a hurdle and others in the same situation.
Sent from my CLT-L09 using Tapatalk
The car is a 06 integra. So far I have the interior stripped
Full roll cage
White line Real sway bar
Rear camber control arms
Yellow speed coilovers
Area motorsport Sperical track rod ends
Rota wheels
Starter control panel
Pbs brake pads
Hondata air box mod
Air con delete
Spent most of the wend getting the control panel ready. I ordered some carbon plastic of ebay and cut it down to size where the radio sits. Using some 2.5mm guage wire I set out getting the push start button working. I have put in an Fia kill switch, and got It going first try. Time consuming getting the panel to fit right anf wiring it for the frist time.
Things coming up next, full 3in exhaust, full dash removal, interior painting, plumber in fire extinguisher. Geometry set up. Bonnet boot pins, final drive m factory, hondata ecu, mapping.
Hopefully this thread might be of some help to both, me as I maybe hit a hurdle and others in the same situation.
Sent from my CLT-L09 using Tapatalk