Hey all,
I'm about to bite the bullet and order a clockwise motion sump baffle but wanted to hear from you guys first. I know lots of guys track with it "with no issues" but does it hold the oil pressure during hard cornering or does the pressure still drop a bit? What is the limit of the clockwise motion baffle?
I had this issue before so I had a custom baffle made and installed a pressure gauge, it seems to have helped a bit but not enough, my oil pressure is at 75psi or higher down the straight but drops to 25psi under cornering at 1.2-1.3g. Oil light doesn't light up but vtec drops out. Can I expect a clockwise motion baffle to hold my pressure at 75psi?
I can probably improve my baffle to seal better but the time invested is a hassle and I don't want to drop my baffle a third time!
I'm about to bite the bullet and order a clockwise motion sump baffle but wanted to hear from you guys first. I know lots of guys track with it "with no issues" but does it hold the oil pressure during hard cornering or does the pressure still drop a bit? What is the limit of the clockwise motion baffle?
I had this issue before so I had a custom baffle made and installed a pressure gauge, it seems to have helped a bit but not enough, my oil pressure is at 75psi or higher down the straight but drops to 25psi under cornering at 1.2-1.3g. Oil light doesn't light up but vtec drops out. Can I expect a clockwise motion baffle to hold my pressure at 75psi?
I can probably improve my baffle to seal better but the time invested is a hassle and I don't want to drop my baffle a third time!