Error code P0112

civicjordan281

Advanced Member
Messages
1,218
My elm light came on this morning with the error code P0112 intake air temp sensor 1 circuit low

Any ideas?
 

C&S Evo7

Administrator
Staff member
Messages
8,229
reset ecu or buy a cheap code reader to clear code and see if it comes back
 

civicjordan281

Advanced Member
Messages
1,218
Ive done a code read and that's what it came up with, will have a go at resetting the ecu, would this have a bearing on vtec working? As it was fine yesterday morning until the eml light came on no it just makes a really deal induction noise and makes no difference, I won't hit vtec again as I don't want to do any damage. If the reset doesn't work I'm stuck
 

dotty

Advanced Member
Messages
6,635
civicjordan281 said:
Ive done a code read and that's what it came up with, will have a go at resetting the ecu, would this have a bearing on vtec working? As it was fine yesterday morning until the eml light came on no it just makes a really deal induction noise and makes no difference, I won't hit vtec again as I don't want to do any damage. If the reset doesn't work I'm stuck
Engine will be in limp mode if the eml is present.
 
Top