Vteccin_teg
Advanced Member
- Messages
- 166
I installed a set of footwell lighting back in November but forgot to upload some photos.
Below is link to the kit:
https://www.ebay.co.uk/itm/332734407339
You get 4x 120mm LED strips.
As the power supply for them is via 12v socket.
Installation:
1: I purchased a female 12v socket and plugged it into that behind the dash
2: I wired the 12v socket I purchased to the following
Red wire on socket - Orange/white on blue radio plug (this is illuminatoln wire so is only live when vehicle lights are turned on)
Black wire - black on radio plug this is earth.
3: I cabletied the sensor box (kit comes with a remote) to the heater matrix support (where your left ankle would be) to easily turn lights on/off or change color on the remote easily)
Sent from my SM-G986B using Tapatalk
Below is link to the kit:
https://www.ebay.co.uk/itm/332734407339
You get 4x 120mm LED strips.
As the power supply for them is via 12v socket.
Installation:
1: I purchased a female 12v socket and plugged it into that behind the dash
2: I wired the 12v socket I purchased to the following
Red wire on socket - Orange/white on blue radio plug (this is illuminatoln wire so is only live when vehicle lights are turned on)
Black wire - black on radio plug this is earth.
3: I cabletied the sensor box (kit comes with a remote) to the heater matrix support (where your left ankle would be) to easily turn lights on/off or change color on the remote easily)
Sent from my SM-G986B using Tapatalk