Heater control panel - can someone confim which bulb please?

The Mighty Clam

Active Member
Messages
86
Hi, the left hand side of my climate control panel is not illuminated red, can someone confirm if I need a T3, T4 or T4.2 neo wedge bulb please? It is the small bulb on the left in the pic I'm after. I've looked on other threads but it's unclear exactly which bulb is for this section.

Screenshot_20211114-153453.png
 

VtecPaul

Advanced Member
Messages
332
Here is the info I have in my tech notes I’ve gathered along the way.

Dash Bulbs:
  • 35871-S3N-901 - Hazard Bulb - 14v 60ma neo wedge
  • 79670-SL0-A01 - T4 neo wedge 14V 100ma (£5.20ea)
  • 79672-S3N-N41 - T3 neo wedge 14v 60ma (£8.88)
  • 79601-S9A-E01 - Dial plastic
Hazards and Dials - T1 bulb, 60mA

Backlight - T1 1/4 bulb, 100mA
 

VtecPaul

Advanced Member
Messages
332
I don’t know how much that helps, I can’t recall which bulbs go where tbh. Been a while since I did the fix myself. Maybe check out my build thread on here, might have more info on there?
 

The Mighty Clam

Active Member
Messages
86
Thanks for that, I've already had a go at it. I managed to cobble as much info as I could before and went for 2 x T4.2 Neo wedge LEDs and 3 x T3 neo wedge. They all work fine, everything lights up :). I stupidly didn't take a 'before' pic, but basically all three icons in the middle of the three buttons were not illuminated, nor was the left side of the panel in general, but looks great now.
 
Top