Help needed on tracking please

[SCOTTIECTR]

Hi folks,

I had the car lowered last week, the tracking seemed out before so went for the 4 wheel alignment after they said it was out a bit so adjusted it. It's still pulling big tinme to the left though, does anyone know what the settings should be, I think they've set my to the DC2 set-up.

Really could do with knowing the correct settings so I can go back and get them to do it to that.

Thanks,

Scott

 

[gonzo]

Would like to know this aswell when I fit my springs and get the alignment checked....

 

[SCOTTIECTR]

Mine definitely ain't right, feels like I've got the CTR again before the rear arms were changed! :lol:

 

[User]

Front caster angle: 1 degree 30 min +/- 1 degree
Front camber angle: 0 degree 0 min +/- 45 mins
Rear camber angle: -0 degree 45 min +/- 45 mins
Front toe-in: 0 +/- 3mm
Rear toe-in: 2 (+2)(1)mm
Turning angle: Inward: 35 degree 0 min
Outward: 28 degree 0 min (reference)
Front and rear wheel axial run-out: 0 - 0.7mm (service limit: 2.0mm)
Front and rear wheel radial run-out: 0 - 0.7mm (service limit: 1.5mm)

Search function "alignment"

 

[SCOTTIECTR]

Thanks, at the moment mine reads like this:

FRONT Camber: Left. -0.20
Right. -0.24

Toe: Left. 0.2
Right. 0.2
Total. 0.4

REAR Camber: Left. -0.58
Right. -1.14

Toe: Left. 1.0
Right. 0.8
Total. 1.8

Can someone interpret this for me please?