Knock Sensor Location

Shak

Active Member
Messages
50
Does anyone know where the location is for the Knock Sensor?


Sent from my iPhone using Tapatalk
 

Shak

Active Member
Messages
50
I don’t understand why the Knock sensor has flagged up on the computer because all I did was change the Exhaust Manifold. Once that was changed the engine management light came on


Sent from my iPhone using Tapatalk
 

Shak

Active Member
Messages
50
Is the DC5 and ep3 Knock sensor the same ?

Also is really worth getting the genuine one or a copy one will work just as good ?


Sent from my iPhone using Tapatalk
 

Shak

Active Member
Messages
50
Is there another way to remove the knock sensor without removing the Inlet Manifold ?


Sent from my iPhone using Tapatalk
 

Tuneboy

Advanced Member
Messages
109
Is there another way to remove the knock sensor without removing the Inlet Manifold ?


Sent from my iPhone using Tapatalk
yea you can reach it from below with some arm flexing. Its the green-one in the middle of the block.

Do you have a Kpro? If so i would just disable the knocksensor. The knocksensor is prone to state "shadowknocks" - especially with upgraded mounts or so. It is designed to detect a bad batch of gas, nothing more. Every tuner disables it.
 
Top