Spoon springs

Tartaruga

Member
Messages
25
My car is lowered on an unknown brand of springs. The rear is too low for me and gives that reverse rake look. Don’t want to go for coilovers at this time so I’ve been looking at Spoon springs but I’ll be using them with oem shocks. My car is PFL FWIW.

Before going this route, is there anything I should be considering? Seems to be some talk of these making noise on oem shocks. The set I’m looking at are used, and don’t have the rubber covers on the springs. I think these may be needed but have no idea where to look for them?
 

skengdR

Advanced Member
Messages
342
when i went spoon springs with oem shocks it made noise at very low speeds at full lock , mainly reversing or getting in or out of parking spaces.

i checked and the lower control arm bushes looked worn , changed the lower control arm bushes and no noise after

Sent from my SM-G970F using Tapatalk
 
Top