Pictures of the front of the car needed.

[andyd]

Hi,

does any one have any pictures of the front of the DC5 with the front bumper removed.

With a clear shot of the beam that goes across the A/C rad.

Many Thanks

Andy

 

[SJ_Skyline]

Andy,

There might be some on here already when Mike was doing a lot of work to his car...

I may of course be mistaken but it's a good place to start looking mate!

 

[andyd]

ahhh cheers fella.

ill get cracking.

if any one finds one in the mean while please post it in this thread.


Andy

 

[Evs]

Or have a look through the bumper meshing threads? :idea:

 

[andyd]

Or have a look through the bumper meshing threads? :idea:

i've tryed that.

There not really very clear.

Andy

 

[sherv14]

at JAE gonzo was meshing scotties bumper and there was a guy taking loads of pictures, i think they are on the ctr forum in the gallery under JAE pics. Thread is huge though.

 

[type-r-dunk]

IF i remember i have the bumper off of a car up at work, i will take a pic for you. The beam should be the straight chunky box section one NOT the narow one with the 2 bends in it (think the EP3 uses the bent one).

Dunx

 

[andyd]

at JAE gonzo was meshing scotties bumper and there was a guy taking loads of pictures, i think they are on the ctr forum in the gallery under JAE pics. Thread is huge though.

I had a look though that lot and couldn't see it.

Andy

 

[andyd]

What I want to know is how the front beam connected.

I’ve circled it here in red.

 

[Suped]

at JAE gonzo was meshing scotties bumper and there was a guy taking loads of pictures, i think they are on the ctr forum in the gallery under JAE pics. Thread is huge though.

that guy would be me.

There's not much on the gallery for your cross beam, but give it a whirl.. its on www.eddie-ip.me.uk/eddieip/jae

 

[andyd]

Cheers,

Azz sent me some pictures last night.

i think i've forgotten a part off my order

Andy

 

[dan the man]

'cough'


achoo..

who sent you pictures, who hooked you up.... :x :roll:


right im off to cliosport for a month

 

[andyd]

ooh yea.

and the man dan!! :lol: :lol:

sorry bud!

Andy

 

[dan the man]

do we have a new member?

THE MAN DAN...

is this my doppleganger? is this my secret twin brother?


find out in the next epsiode of getting BALLS DEEP WITHIN THE FAMILY

:shock:

 

[AndyBITR]

Hi Andy,

The bumper beam is held in place by four bolts. Will be fitting a new one to mine too!!! It's a doddle to remove and refit.

While on the subject of pictures with a front bumper removed.....does anybody have some showing the wiring on the front right horn sounder?? I need to see if I have lost any wiring from mine.

 

[f1nal zeros]

Does this help?

 

[andyd]

yea thats does.

Hmmmmm interesting.

nice oilcooler!

how comes yours has bits ether side??

Andy

 

[f1nal zeros]

Sorry for the long wait for reply. Those little hole hold on a styrophone piece that goes between the bumper and support frame. they just help hold the styrophone on better.
Oil cooler is a nice add on for me.