Recent content by SnejVTEC

I came up with this idea. A ”nut rivet” throug the plastic and then a bolt with a nut so I can adjust and lock it in place :)

Thanks! They do

or 17x8 with 215 tyres if you likea tiny bit of sidewall stretch :)

You could run these specs but without spacers at the fronts and with a bit more camber or rolled arches in the back. :)

If you want to be quick around a track, wider tyres/rims is allmost allways better. Otherwise you can go with narrower for lighter steering and better mpg

Thanks! Lowered on coils. About 2.8 degrees of camber at front and 1.8 at the rears. 235/40 tyres :)

Slipstreams in 17x8 et48. 5mm spacers at front :)

:)

They used 17x9 😊

Nice! Did you weigh it all? 😊

Maybe the subframe have moved a bit towards one side. That would give you more camber on one side and less on the other. Just a thaught. Might be a thing to check 😊

All the time, in my white PFL 🤔

Yes, you can have ep3 hub with ep3 disc, but you cant mix disc with hub, from dc5 and ep3

Thats wierd, because you shouldn‘t be able to install dc5 discs on ep3 hubs as the caliper wont line up.