40 et ?

[Phil r type]

OK have some et40 7j 215 r17's I'm on coil overs , 60 mm drop . I get a little rub (Lucky me) at the front from time to time. any ideas how to stop this without raising the height ? Was thinking more camber ? What have you guys done ? Running 2.0 back and 1.1 front . thanks

 

[MrRy]

I'm on et38 with 225 wheels and 8mm front spacers and 6mm rear spacers and it scrubs. Had the car lifted 10mm all round annddd it scrubs. Took the spacers off and even when dampers are set to 24 front and 26 rear the rears still scrub on oversteer bumps on track.

You could get the rear lips rolled, but sadly the best and only way is to go higher. Even on a 60mm drop your front should be lower than rear so just have the back raised if its not?

 

[Phil r type]

Backs OK its only the front that's rubs might try 2.0 degrees front

 

[MrRy]

.I'm running -2.0 degree camber on the front and it's partly why it handles great for my needs (spirited b road driving, fun roundabouts, etc.).