Anybody knowledgeable on mapping?

[kazmo]

Kazmo, everyone is entitled to their opinion

and my opinion is Romain is very good, he's done my cars for years with never any bother, in fact my first DC5 he sorted a 'flat spot' and made it a much nicer car to drive, which had been mapped at TDI by the previous owner..
and jcdc5's opinion is that Romain isn't very good, which is fine, pay your money and make your choices, i can only base my opinions on my experiences

 

[jcdc5]

if it help i can upload air fuel ratio of both maps?
only difference is that i now run a 3inch exhaust and larger crank pulley.

 

[Josh16v]

jcdc5, yeah it has the auto tension bracket fitted.

I'm not knocking Romain, like I say he got good power out of the car.
As far as I understand (don't do electronics!!) mapping is quite a complicated procedure so the hiccup is fine, as long as it can be rectified.

 

[beppe786]

Keep monitoring your datalogs and make slight changes. (ONLY IF YOU KNOW WHAT YOUR DOING) making it run rich is safe and waste of fuel wont be quickest just more torquey. if tunner puts time in gets air fuel / ignition spot on then your half way there then cam angles have to be right also