Bonnet wont close all the way

[J teg]

i have a carbon bonnet for about a month now i dont have any problems to close,suddenly when i Try to open today it wont close all the way and there is a gap on both sides between the headlights

 

[mikey_t8]

Try the adjusters on either side by the headlights.. another problem I had was the air con pipe too high.. push that down and move it to the right abit..

 

[MilanoChris]

To add to the above, because there's very little weight compared to the OE bonnet, sometimes you have to press quite hard for the latch to operate. It may be worth greasing it up or seeing if any components need replacing such as the spring etc.

 

[MissMyDC2]

There is also adjustment on the catch/latch assembly. Two bolts with little marks so you can get it even.

 

[ady83tyt]

Try check the t bar lower bolt.. already happen to me the bolt missing or loosen..


Sent from my iPhone using Tapatalk