continuing the topic of bleeding..
I just did my car and all the calipers was good except the front right, inner nipple. it just kept pushing air bubbles no matter what. I probably went thru 1-2 liters of RBF600 and this is the shortest brake line on the car so it shouldn't really take much at all.
I did not open the nipple too much.
I switched the nipples around but the problem remained so the nipple itself is fine.
The outer nipple on the same caliper is fine, no air bubbles, so the brake line itself must be ok?
So where does the air come from? Maybe the threads on the calipers? in this case, all is good, but it's quite hard to be sure about that.
too much nipples..