coolant bleeding

[jpstyper]

I have just fitted a new radiator and when I drive it the engine light comes on with engine over temp I think this could be due to air in the system the fans cut in so they are trying to cool it

is the integra a self bleeding system or is there a way of bleeding it

 

[davidpingu]

It should sort it's self out but it needs to be done by letting the engine come up to temperature with the rad cap loose. The entire process is explained in the workshop manual if you have it. Hope that helps

 

[jpstyper]

Ok I will do that
thanks

 

[dave7368]

run it with the cap off until the thermostats open but also make sure you have the heater set to max too!!

 

[jpstyper]

Sorted now thanks for the advice it seems to have worked
cheers