Cosmis MR7's

[Jones_XD]

Cosmis MR7's only seem to come in ET+25

how much work is gonna be required to fit these on to my DC5, seen a couple of DC5's in america running these wheels and they look the bomb :xyes:

http://www.ebay.co.uk/itm/Cosmis-Racing-Aluminum-Racing-wheels-rims-18x9-25-5x114-MR7-GUNMETAL-/190887378553?pt=Motors_Car_Truck_Wheels&hash=item2c71c63e79

There's a link to the spec of the wheel.

Any help with be most appreciated :xgrin:

 

[Dan34]

I'm afraid they will take an a lot of work to fit, at least rolled if not pulled arches and stretched tyres and a some negative camber.

Probably better off looking for something a bit narrower.

 

[Jones_XD]

Yeah was thinking was gonna need aload of work

time to start looking for a different set i think

 

[C&S Evo7]

the rsx has a lower offset from standard so its easier to fit wheels like this, the hubs sit 15mm further in on an rsx either side

 

[Jones_XD]

That explains why i've only seen them in america then.

Thanks for the info :xgrin:

 

[Justintian]

You can roll the rear arch and change the front fender to wide body to suit...if you really like the wheels why not :xyes: stance american look.
you can always try mesh wheels, they are classic...