Dc5 track rod thread pitch

[Kellsled]

Is the thread pitch for the dc5 track rod m14x1.5? Just want to double check before I buy anything

 

[Liam]

I believe standard DC5 track rod ends are M12 x 1.25mm.

 

[Kellsled]

I tried a m12 boot inside rod last night and was to small must be m14 by whatever it is

 

[Tegiwa Imports]

We keep genuine Honda in stock if you get stuck: http://www.tegiwaimports.com/genuine-honda-track-rod-ends-integra-type-r-dc5.html

 

[Kellsled]

M14x1.5 they are in case anyone ever needs to know

 

[mike.williams]

was just about to say they are m14x1.5.

just be aware that if you are inverting the rod ends you may get undesirable toe in under compression. i could visually see mine with my rod ends inverted when i lowered the car off the jack.

best to bumpsteer test, but i could probably save you a few £££ and say not bother but its your choice