Defi Oil temp & pressure readings for DC5R

[pawpaw]

Hi all,

Just bought a set of Defi gauges. May I know what are the normal operating oil temp and pressure readings for a JDM DC5R?

 

[kazmo]

Relief valve, oil pressure with oil
temperature at 176 °F (80 °C)
At idle 70 kPa (0.7 kgf/cm , 10 psi) min.
At 3,000 rpm 300 kPa (3.1 kgf/cm , 44 psi) min.

 

[pawpaw]

Relief valve, oil pressure with oil
temperature at 176 °F (80 °C)
At idle 70 kPa (0.7 kgf/cm , 10 psi) min.
At 3,000 rpm 300 kPa (3.1 kgf/cm , 44 psi) min.

Thank you!

 

[pawpaw]

just got the meters installed. the oil temp is much higher at 95 °C though. normal?
oil pressure = 200 kPa at idle
water temp = 90°C

 

[Honda-atr]

Yes that is normal. My oil temperature (Defi) is always between 95 and 110 degrees.
It depends on my driving style

 

[pawpaw]

Yes that is normal. My oil temperature (Defi) is always between 95 and 110 degrees.
It depends on my driving style

That is good to know!

 

[viggen]

Please can i ask where you got your defi kit from?

 

[viggen]

What would be considered high readings to avoid?

 

[pawpaw]

Please can i ask where you got your defi kit from?

Hi I got it used from someone

 

[MrRy]

My oil temp tends to be around 80c once warmed. I do have a lower temp Mugen thermostat in. Pressure wise, my Defi will read around 6.0 to 7.0 pressure when cold and driving, to above 2.0 and below 2.5 when the thermostats have opened and it's up to temp.

 

[linh-ej9]

My prosports gauge is around 80-85 normal driving. 85+ on motorways

 

[Sam.]

Use them as a guideline not gospel

Sent from my XT1092 using Tapatalk