H Highlander Member Messages 43 Jun 28, 2005 #1 Does anyone know of the top of their head what the front brake disk rotor size is (diam and width) and the wheel PCD? Ta
Does anyone know of the top of their head what the front brake disk rotor size is (diam and width) and the wheel PCD? Ta
H Highlander Member Messages 43 Jun 28, 2005 #2 OK so I'm an idiot who didn't read the post three below the one i just stuck up that had half the answer :roll: Still would like to know what the brake disk size is, oh and the wheel offset whilst we're at it.
OK so I'm an idiot who didn't read the post three below the one i just stuck up that had half the answer :roll: Still would like to know what the brake disk size is, oh and the wheel offset whilst we're at it.
T T666YPR Moderator Messages 2,102 Jun 28, 2005 #3 I've got replacement rotors and I still don't know :lol: I'll take a measure when I get the chance Offset is 55 or 60,this will be with the least clearance from the calipers,if I understood correctly,when it was explained. My alloys are 17x7.5" with a 45 offset. The smaller the number,more clearance iirc
I've got replacement rotors and I still don't know :lol: I'll take a measure when I get the chance Offset is 55 or 60,this will be with the least clearance from the calipers,if I understood correctly,when it was explained. My alloys are 17x7.5" with a 45 offset. The smaller the number,more clearance iirc
F fonz600 Advanced Member Messages 575 Jun 28, 2005 #4 Wheel size 17 x 7JJ Wheel offset 60mm Wheel pitch circle diameter (PCD) 114.3mm Taken from the specs bit off this website.
Wheel size 17 x 7JJ Wheel offset 60mm Wheel pitch circle diameter (PCD) 114.3mm Taken from the specs bit off this website.
H Highlander Member Messages 43 Jun 28, 2005 #5 Thought I'd checked that, but obviously wasn't looking in the right place. Bit of brain fade me thinks caused byDC5 test drive at lunch time :lol:
Thought I'd checked that, but obviously wasn't looking in the right place. Bit of brain fade me thinks caused byDC5 test drive at lunch time :lol: