Beefman147
Member
- Messages
- 22
Having a nightmare with a door lock actuator that I have just replaced! When reassembling the actuator I couldn't recall exactly how it went back together (stupid I know)
Anyway got it assembled how I thought it was supposed to go and now the actuator works perfect but when I try and open the door from the inside I get nothing. From the outside everything is fine.
Going to pull it apart again tomorrow and would appreciate any advice or photos of how the latch should be attached if possible.
Cheers
Anyway got it assembled how I thought it was supposed to go and now the actuator works perfect but when I try and open the door from the inside I get nothing. From the outside everything is fine.
Going to pull it apart again tomorrow and would appreciate any advice or photos of how the latch should be attached if possible.
Cheers
