Enkei wheel size

[LC5]

I see everyone is getting RPF1 17x9 et45……has anybody got them in ET35 9inch on here?


Thanks

 

[mike.williams]

Et35 still require a big spacer to clear the front caliper which makes them not fit.

Et35 is too low for the rear aswell.

+45 all round with 8mm front spacer works best hence why people run them.

 

[Brecht]

wouldn't et35 be okay for the front? +45 with a 8mm spacer is still higher. For the rear it's a bit low indeed.
Running et33 8.5j front and rear on mine , does require a bit of camber though.

 

[RobS]

im debating getting these at the moment as well. Been talking to Indi, and 3.2 front camber and 1.8 rear is required, along with the 8mm spacer and rolled arches.

car is a track car but also my daily, not sure if the camber is too much to warrant it...

 

[LC5]

Hey Guys thanks for your replies…been helpful

 

[LC5]

Hey guys just refreshing this wondering if anybody else out there is running et35 on these wheels

 

[pawpaw]

I am running 17x8 et35 for my jdm dc5r on stock suspension and no camber kit.

The front is protruding slightly but not rubbing, back require fender roll.

 

[FireDance]

I had the Evo 8 enkei's on my blue DC5.

They were 8j & et 38. I used 215 tyres as they would rub on 225 on the rear