blueguy Resident J's whore Messages 3,785 Feb 14, 2010 #1 Hi all, Are 7/16" eyebolts the ones we should use for harnesses (fitted to back seat anchor points)? I've just bought a pair of second hand Willan Harnesses, but the owner is keeping the eyebolts for his next harness set. Cheers,
Hi all, Are 7/16" eyebolts the ones we should use for harnesses (fitted to back seat anchor points)? I've just bought a pair of second hand Willan Harnesses, but the owner is keeping the eyebolts for his next harness set. Cheers,
C&S Evo7 Administrator Staff member Messages 8,229 Feb 14, 2010 #2 yes, 7/16 UNF is the actual thread size, they come in a few lengths, usually 20mm. 32mm and 50mm, the 50's can more expensive tho depending on the supplier.
yes, 7/16 UNF is the actual thread size, they come in a few lengths, usually 20mm. 32mm and 50mm, the 50's can more expensive tho depending on the supplier.
blueguy Resident J's whore Messages 3,785 Feb 14, 2010 #3 Thanks Si. What length would you recommend for my application? - Standard interior/seats although I may swap the seats out at a later date. Cheers,
Thanks Si. What length would you recommend for my application? - Standard interior/seats although I may swap the seats out at a later date. Cheers,
Y Yella Fella Nismo Wannabe Messages 943 Oct 12, 2010 #4 I'm interested in this too as about to order some cheaper (though would love takata) harnesses. I guess they don't come supplied normally?
I'm interested in this too as about to order some cheaper (though would love takata) harnesses. I guess they don't come supplied normally?
Chris-DC5 Advanced Member Messages 744 Oct 12, 2010 #5 You should get some eye bolts with a new set of harnesses. If not then some with 20-25mm thread will do the job.
You should get some eye bolts with a new set of harnesses. If not then some with 20-25mm thread will do the job.
blueguy Resident J's whore Messages 3,785 Oct 12, 2010 #6 As above and if you are in the unusual position I was in, you can get them cheap off ebay Ed
Stylesa Advanced Member Messages 1,206 Oct 12, 2010 #7 As above i got 7/16" UNC, 20mm long with mine.