Fitting RBC manifold

[Chris_EK4]

Are there any modifications required to fit one to a DC5? Sorry for ignorance just want to make sure's no silly niggles to overcome before I rip the old one off, read somewhere they need modding to fit a K20a head, (have 70mm tb with plate) just some of the holes/ports in the top look differently placed to the oem DC5 inlet,

Thanks

 

[Mark_teg]

Can you post a photo of it?

 

[Brophy]

As far as I'm aware all RBC's need modified and few bits cut off but this is always done before sold generally.

As said post up a photo and can have a look

 

[dave7368]

this is the bit that needs to come off...but like said before it will almost certainly have been done already...

 

[Chris_EK4]

Thanks guys, yes seeing that tells me mine has defiantly been modified to fit k20, can't get pic atm as my galaxy is broken, but hopefully problem solved, thanks for help

 

[tricker_luke]

I fit the map sensor to the manifold so had to extend the wires, I think most probably fit it to the throttle body.
I also had to trim the bonnet lever plastic catch slightly so it didn't rub the rbc.