Geo settings to clear et38

[Rom]

As above, I need to geo my car, to clear 17x8 et 38 with 225 45 re070.

The catch being, I need to geo it with oem wheels on!
I'm thinking - 1.5 camber should be enough.
Hoping someone has similar specs and can remember what they are running.
Rears are rolled

Cheers

Sent from my SM-G928F using Tapatalk

 

[Fvil]

I m running 17x8 et 38 with 225 45 re070 and on standard suspension.

The rears seem to be flush but the front do stick out, so definitely need some front camber!

Gonna roll all the arches, when I get a chance.

 

[Chewy]

I'm running -1.5 negative camber all around to fit my 17x8 ET 35 with 225/45 Goodyear Eagle F1.

 

[Rom]

I'm sure when I tried them last year, the rears poked a fair bit.
Front were mostly ok. That was with maybe - 1 rear

It's on spoon springs, oem shocks.

Sent from my SM-G928F using Tapatalk

 

[FireDance]

Why do you need to geo with the OEM alloys on?

 

[wj51fut]

Why do you need to geo with the OEM alloys on?

The new ones are at the sprayers...

I have et38 wheels but with AD08 215 tyres. Front is -1.7 rear is -1.3. Clears fine. But I'm on a 8j wheel so the tyre is stretched slightly.

 

[Shortstuff]

As I said I have -1 on the rear with my 225 tyres and it does rub on one side ever so slightly which is why I want -1.5

 

[Chewy]

With my -1.5 I do rub on occasion on the rear but only with a full car when I go over a very bad dip/bump (on a country road) at 60mph+ for example.

That's on Mugen suspension as well, so not as low as Spoon springs and firmer ride.