Help required to identify front bumper bolts

[p1tse]

So following DIY removal of front bumper
http://www.itr-dc5.club/forum/index.php?/topic/24307-front-bumper-headlight-removal/page-2#entry446182

I would like to refresh some bolts and washers, ie the one inside the arch corner of bumper, the bolts and plastic pop rivets on the underside

Can anyone help identify which bolts and washers I need from the following diagram please?

 

[kyle'87]

Correct me if I am wrong but I *think* the fixings holding the bumper on are numbers 28, 31 and 41.

Could you get visual pictures of the ones you want to change, as to be 100% correct with what ones you are looking to freshen up?

 

[TyperItr]

Bring the original bolts to a building supply store and they will get ones to replace your current ones. Honda will charge you a fortune compared to them. B&Q and the likes etc will rip you off also.

 

[p1tse]

Thanks
Think 28,41 myself but not 31 as that joins the lip I think

41 looks like the plastic clip

Not sure which bolts goes up from underneath


True probably can get from a store but not getting loads so happy to get them knowing they are the right ones

 

[Johngreen537]

28, and the plastic clips into the slam panel, so I would actually say number 9....

Sent from my HTC 10 using Tapatalk

 

[p1tse]

28, and the plastic clips into the slam panel, so I would actually say number 9....

Sent from my HTC 10 using Tapatalk

Do you mean 29?

 

[Johngreen537]

Yep. Typo

Sent from my HTC 10 using Tapatalk

 

[Matt-DC5]

28 and 29

 

[p1tse]

Thanks

Just counting how many of each

From memory there were two bolts under the air duct position on each side. Would these be 29 or 33 or 50?