How to fit Brembo brake pads?

[NiTrO]

Hi,
I want to fit my new brake pads. Basically I know how to fit them, but I dont know where is the right place wear-indicator. After fitting the wear-indicator is in under outside position. Is this correct? I miss to memorize the position before I changed the pads :? ...

 

[C&S Evo7]

what wear indicator?

the front brembo pads don't have one akaik??

 

[tricker_luke]

The front Brembo wear indicators on mine are on the outside at the bottom

 

[NiTrO]

I was wrong, my are on the outside also, but on the top!

I think its okay or Im wrong?

 

[tricker_luke]

I would say just swap the outer pads to the opposite side of the car, e.g. left outer pad to the right outer.

This should put the wear indicators at the bottom.

 

[C&S Evo7]

the wear indicators (I can't think that any of the pads i ever had had them, but if you have them then...) they need to be able to rub on the disc when the pads are worn, this makes a squeeling noise.
it doesn't really matter where they are as long as they can touch the disc.

I would put them on the inside as you can see when the outside pad is worn easily but not the inner