Hybrid Racing throttle body

[wj51fut]

Hi

I've just fitted a HR TB and all fitted ok. When I started the car up it seems to idle at 2k revs. I fitted a Skunk2 inlet manifold at the same time. It's going for a map on Thursday. Will this sort it?

Also, has anyone else fitted a HR TB? The throttle cable on mine seems to be too long. No adjustment either on the TB itself.

Any help appreciated. 👍🏻

 

[Johngreen537]

TPS adjustment I'd think mate.
You need to record the min / max thresholds in kmanager, and adjust the TPS to get the min measure to be as close to 0 as possible.

Easily sorted while mapping

Sent from my E6653 using Tapatalk

 

[wj51fut]

Romain adjusted the TPS for me. Having issues with the throttle wheel now. It moves about 10mm round before the butterfly opens. How tight do I put the cable? To where the butterfly opens or to where the wheel settles? On the OEM one there is no slack in the wheel. It's either open or close for the butterfly.