Insane Driveshaft

[tricker_luke]

I've just taken arrival of a driver side Insane driveshaft, measured it and it is correct at 597mm!

I've tried about 4 different driveshafts and all have been 15mm too short, 582mm but this one looks to be correct! :xgrin:

The build quality is nice as well, and has decent looking clips:

 

[coyote_dc5]

welcome back to the forum! Looks a decent part, proof is in the eating so get it fitted

 

[C&S Evo7]

they still break, but are better than stock, more chance if the length is correct, i just wish people would listen when they ask about shafts, then claim the rsx ones are fine lol.

 

[Tegiwa Imports]

We've sold quite a few sets of DC5 shafts, not had any problems with them so far!

We have them in stock too!

http://www.tegiwaimports.com/insane-driveshafts-500hp-axles-honda-integra-dc5-type-r-01-06.html

 

[tricker_luke]

I was the most recent purchaser Tegiwa, I'll get it fitted at the weekend and hopefully it will all match up etc

 

[hondamad2204]

Any update on if they fit mate?

 

[tricker_luke]

Yes I fitted it and it was exactly the same length. All seems to be ok so far after about 500 miles.

 

[Humm]

I only have the one, on my passenger side. And it has survived a beating a Brands Hatch for a full day! Seems good quality too

 

[Coldfuse]

Are these the same parts that are £1000 from Honda?

 

[Humm]

Yeah a pair of shafts from Honda is just over a £1k

 

[Lukemitchell]

Just orderd one of these myself..
Glad to hear they are a good fit.
Just to check, there will be no problem fitting just one of these and keeping a standerd drive shaft on the other side!? I.e car pulling to one side or anything !? Cheers.

 

[tricker_luke]

Bit of a late reply but no, it makes no difference at all.