Mugen Engine Mounts

[dayman0]

I'm looking to replace worn engine mounts.

Is this all I need?
https://www.rhdjapan.com/mugen-engine-mount-set-ep3-dc5.html

Or do I need a rear mount also? https://h-tune.co.uk/genuine-honda-rear-torque-engine-mount-civic-ep3-integra-dc5/?gclid=Cj0KCQjw0PTXBRCGARIsAKNYfG20XK0MwdEABvLfjrmB2os47AqJKZALUGtvUWrMzj1nkasqB6t3RkgaAgFHEALw_wcB

Ta

 

[GillyDC5]

I'm looking to replace worn engine mounts.

Is this all I need?
https://www.rhdjapan.com/mugen-engine-mount-set-ep3-dc5.html

Or do I need a rear mount also? https://h-tune.co.uk/genuine-honda-rear-torque-engine-mount-civic-ep3-integra-dc5/?gclid=Cj0KCQjw0PTXBRCGARIsAKNYfG20XK0MwdEABvLfjrmB2os47AqJKZALUGtvUWrMzj1nkasqB6t3RkgaAgFHEALw_wcB

Ta

Hi

I have the exact mounts which are very good, just a little bit tougher then standard but not harsh at all!
I ordered a rear engine mount separate to these which was just an oem one

Cheers


Sent from my iPhone using Tapatalk

 

[hondamad2204]

As above, only gives you 3. A new rear isn't much, in relation to the others anyway. I'm slowly changing all of mine over, but the lower 2 are a PITA. lol

 

[dayman0]

Hi

I have the exact mounts which are very good, just a little bit tougher then standard but not harsh at all!
I ordered a rear engine mount separate to these which was just an oem one

Cheers


Sent from my iPhone using Tapatalk

Spot on, exactly what I'm after.

Cheers!

 

[ollydc5]

The Mugen set of 3 is similar to the j‘s set I have which are approx 25-30% stiffer over the oem ones. The j‘s ones I‘m running along with a hardrace one on the rear are perfect there is no massive difference compared to Hasport etc, I say a set of 3 Mugen along side an oem rear would be great 👍🏻