O2 Sensor differences

[adam.]

So I'm trying to ascertain which part numbers are for pre and post cat o2 sensors here:

http://www.jp-carparts.com/honda/partlist.php?maker=honda&type=INTEGRA%203D&cartype=25411&fig=B&fig1=200

The list gives 5 options too!

27 36531-PND-J11 SENSOR, FRONT O2 JPY 27,103 USD 271.03
27 36531-PNE-K01 SENSOR, FRONT O2 (WITH CLLIP) JPY 27,103 USD 271.03
27 36531-PNE-K11 SENSOR, FRONT O2 JPY 27,103 USD 271.03
28 36531-PRB-A01 SENSOR,LAF JPY 27,103 USD 271.03
29 36532-PRC-004 SENSOR, REAR O2 JPY 27,103 USD 271.03

Does anyone know for sure which are the right ones for a PFL with DC5-2100*** chassis number?

It looks like there's a manifold out there thats 4-1 as opposed to 4-2-1, but I know these diagrams aren't 100% !

 

[Matt-DC5]

hi mate, looking at the diagram shown I would say that its parts 28 and 29 as the picture showing 27 is an ep3 catpipe. hope this helps

 

[wj51fut]

Front sensor



Rear sensor



HTH 👍🏻

 

[adam.]

Thanks lads, much appreciated.

Sticky?

 

[tricker_luke]

Anyone know if the connector ends can be bought? My rear sensor just has the pins pushed into the chassis mating connector, no casing.
Saying that, I'm not sure the rear is even used with Kpro?

 

[wj51fut]

I can dig mine out of the bin if you want it? I can post it to you.

 

[tricker_luke]

That would be good, i think it's the secondary but can confirm when I get home and pm you detail, thanks.

 

[kyle'87]

Anyone know if the connector ends can be bought? My rear sensor just has the pins pushed into the chassis mating connector, no casing.
Saying that, I'm not sure the rear is even used with Kpro?

It might be worth putting up a post for anyone who swaps out a duff 02 sensor if they can seen you the duff one and you could dismantle it and fit the connector to yours. I recently changed my primary but have since thrown it away.

 

[tricker_luke]

Already sorted in the post above from WJ51FUT Just need to confirm later