offset?

[chiefpulsar]

hi all,

i'm looking at changing my o2m wheels to these http://cgi.ebay.co.uk/4-17-LENSO-D1R-MB ... 4cebd4d1b2
now will these fit alright or do i need a different offset i.e 35 et or 45 et?

thank you

craig O

 

[donkeykong]

40 will fit but ur wheels will stick out more!! oem is 60 which means your wheels are 2 cm further out.
it should be fine but take the original 215-45-17 tire size, 225 could maybe do the job also, but u have to try.
it also depens id ur car is lowered

i got some tenzo mach 10 also black with red 18 inch, 7,5 wide on eibach lowering springs...215 wide works good.

good luck mate

 

[chiefpulsar]

thanks for the reply fella, et60 is oem, i'll rethink my plans a bit then O

 

[TyperItr]

I have a set of spoon springs. I fitted 17x8.5 +42 on the back with no bother at all. Standard size on the front though

 

[j88 aaf]

looking around on honda-tech in the USA it seems easy to get away with +35 offset without many issues, providing you aren't ridiculously low.

the wheels i'm looking to get are +35

 

[chiefpulsar]

i think mine is lowered 35-40mm on eibach springs but dont quote me on the height

 

[Evs]

40 is marginal (assuming 7.5 wide, I can't see the link at work).

I wouldn't, but it's your car.