Primary sensor

[SDDC5]

Hi can any one give advise on undoing this sensor it's a real pain to unscrew, I've sprayed it loads using the oxygen socket, spanner etc and the thing will not unscrew ???
Thanks
Si

 

[Fez]

Hi can any one give advise on undoing this sensor it's a real pain to unscrew, I've sprayed it loads using the oxygen socket, spanner etc and the thing will not unscrew ???
Thanks
Si

Mine was crazy tight, ended up using oxy cetaline, and it came straight off.

 

[SDDC5]

If I was to turn car on and let it heat up do u think that would help ?

 

[sabberjoch]

I cut of the cables running to it, So i could fit a socket on to it. Only helpful when the sensor is already broken. If you need a new one, Rockautoparts in america has them for way less than uk based sellers

 

[nellly]

mine came off easily enough but yes i did have a hot exhaust first. give it a go you can always cut the wires and get a long socket over it like above.

think its a 22 as well

 

[SDDC5]

Thanks shall give it a go later thanks for help
Si

 

[Kev.W]

I've not long replaced mine and I just cut the wires and through a long impact socket on


'04 Nighthawk Black Integra Type R (DC5)

Instagram: kevinwynne1990