Removal of front bumper

[SCOTTIECTR]

How easy is it to remove the front bumper in order to mesh it?
Anyone done a "how to"

Thanks,

Scott

 

[dobber]

Its a doddle. Undo the some screws under the front bumper, one screw on either side of the wheel arche and then start popping it out the clips. It really is easy, supprisingly so

 

[SCOTTIECTR]

Thanks Dobber, I done it on the CTR just wondered if there was some hidden bolts or soemthing that I would end up ripping the bumper off!

How did you secure your mesh, on the CTR i used a glue gun, it appeared to melt again in the sun though so then had to add a few cable ties.

 

[mikegsi]

heres a link i was pointed to for the fitting of an injen cai, there's a clicky link which deals only with the removal of the bumper, with pics!!!


http://performance.clubrsx.com/prsxinjencai.html

 

[SCOTTIECTR]

Excelent thanks Mike.

 

[gonzo]

Same as CTR pretty much mate!! :lol:

 

[Evil_Weasel]

A how-to on meshing front bumper on the RSX:

http://performance.clubrsx.com/grill.html

Although no detail on actually removing the bumper!

 

[T666YPR]

If you've got the RSX manual,from the link that was posted,then to remove the bumper it's Chapter 20,Page 87.



(Finally sussed how to do the thumbs pic link,by myself :xrockout: )



Cable ties for me.
(obviously trimmed after,wish I'd done black mesh though)