S SCOTTIECTR Advanced Member Messages 1,127 Apr 20, 2005 #1 How easy is it to remove the front bumper in order to mesh it? Anyone done a "how to" Thanks, Scott
dobber Advanced Member Messages 336 Apr 20, 2005 #2 Its a doddle. Undo the some screws under the front bumper, one screw on either side of the wheel arche and then start popping it out the clips. It really is easy, supprisingly so
Its a doddle. Undo the some screws under the front bumper, one screw on either side of the wheel arche and then start popping it out the clips. It really is easy, supprisingly so
S SCOTTIECTR Advanced Member Messages 1,127 Apr 20, 2005 #3 Thanks Dobber, I done it on the CTR just wondered if there was some hidden bolts or soemthing that I would end up ripping the bumper off! How did you secure your mesh, on the CTR i used a glue gun, it appeared to melt again in the sun though so then had to add a few cable ties.
Thanks Dobber, I done it on the CTR just wondered if there was some hidden bolts or soemthing that I would end up ripping the bumper off! How did you secure your mesh, on the CTR i used a glue gun, it appeared to melt again in the sun though so then had to add a few cable ties.
mikegsi Moderator Staff member Messages 6,095 Apr 20, 2005 #4 heres a link i was pointed to for the fitting of an injen cai, there's a clicky link which deals only with the removal of the bumper, with pics!!! http://performance.clubrsx.com/prsxinjencai.html
heres a link i was pointed to for the fitting of an injen cai, there's a clicky link which deals only with the removal of the bumper, with pics!!! http://performance.clubrsx.com/prsxinjencai.html
E Evil_Weasel Advanced Member Messages 444 Apr 20, 2005 #7 A how-to on meshing front bumper on the RSX: http://performance.clubrsx.com/grill.html Although no detail on actually removing the bumper!
A how-to on meshing front bumper on the RSX: http://performance.clubrsx.com/grill.html Although no detail on actually removing the bumper!
T T666YPR Moderator Messages 2,102 Apr 21, 2005 #8 If you've got the RSX manual,from the link that was posted,then to remove the bumper it's Chapter 20,Page 87. (Finally sussed how to do the thumbs pic link,by myself :xrockout: ) Cable ties for me. (obviously trimmed after,wish I'd done black mesh though)
If you've got the RSX manual,from the link that was posted,then to remove the bumper it's Chapter 20,Page 87. (Finally sussed how to do the thumbs pic link,by myself :xrockout: ) Cable ties for me. (obviously trimmed after,wish I'd done black mesh though)