Replace mount or insert-front mount

cameroon95

Advanced Member
Messages
294
Hi guys,

After a check up of my teg ive noticed that the fron mount seems to be gone? Pics below, question is should I just buy inserts or should I buy the mount from honda and fit it?







 

JoSh

Member
Messages
32
What makes you think its gone. Its hard to tell from the pictures, is the rubber torn or cracking?

Not sure on the price of OEM replacements - but depending on what you use your car for it may be worth considering aftermarket mounts such as Hasport or Innovative. I've just fitted some Hasports, but they can be a bit much for some people especially if you use your car on regular long distances, but they allow for the front mount to be discarded & have other positives aswell.

Josh..
 

cameroon95

Advanced Member
Messages
294
The car is kinda lurching at the mount on pedal press on acceleration and daccleration, its a bit jolty if you will.

I know this mount is common to go , I was thinking I may just get inserts and go from there? At least then I could move on to the other mounts...

Gearbox mount looks ok, havnt checked the lower mount yet though
 

Mark_teg

Moderator
Staff member
Messages
4,361
As above, difficult to tell in the photos.

If its knackered change the mount and fit inserts, that's what I would do.
It's normally the rear mount that fails though iirc.
 
Top