Shifter bushing kit

[Judley]

Came across this kit on the CTR owners forum. Apparently it replaces the worn OEM bushing and tightens up the shift? Has anyone got experience with this on a DC5?

Cheers,

George

 

[Kinli]

If you are talking about the bushings that goes on the shift cables at the gearbox end then the EP3 / acura rsx bushings won't fit correctly. There are two cables and the smaller one is ok, fits just right, but the bigger one is a different size on the JDM dc5, so it's a no go. as for the bushings that goes under the shifter, well, the JDM dc5 won't need them as it hasn't got any bushings at all there (unlike the EP3 / acura rsx).

 

[Judley]

If you are talking about the bushings that goes on the shift cables at the gearbox end then the EP3 / acura rsx bushings won't fit correctly. There are two cables and the smaller one is ok, fits just right, but the bigger one is a different size on the JDM dc5, so it's a no go. as for the bushings that goes under the shifter, well, the JDM dc5 won't need them as it hasn't got any bushings at all there (unlike the EP3 / acura rsx).

Cheers fella, appreciate that