Skunk2 Inlet Manifold

[-Birdy-]

Ive recently purchased a new skunk2 inlet manifold and just need abit of advice before fitting it.

The manifold does not have a vacuum port on the left hand side which would have a hose going to the ps pump. Is it necessary for me to get a port put in the manifold or is there another way for the ps pump to connect to?

Anyone who has previously fitted one of these and has any info then it would be appreciated.

Cheers

Tom

 

[beppe786]

its the water pump breather..

i've seen people with skunk2 just point the breather pipe downwards

 

[maxvr6]

Doesn't newyorkaddict have one of these? Might be worth asking how his is setup?


Sent from my iPhone using Tapatalk

 

[-Birdy-]

Ah I thought it was the power steering pump, my bad.

So its not necessary to connect it to anything?

Would it be best to put any sort of small filter on it or not?

 

[-Birdy-]

Doesn't newyorkaddict have one of these? Might be worth asking how his is setup?


Sent from my iPhone using Tapatalk

Good shout, il send him a message.

 

[beppe786]

let me explain for you..

waste oil and crap comes out of the water pump back into the inlet manifold to be burnt away..

i wouldn't put a filter on it.. just let it drip out. problem, you have you need a slight vacuum and you could have installed a small catch can on it..

 

[-Birdy-]

Thanks for the info Beppe, makes more sense now.