Spacers at rear.

[Jamesdelll]

Hi all,

Currently running stock rims on eibach springs with eibach camber arms and bolts. Potentially change to some nice coilovers at some point.

Looking to fill out the rear arches a tad on the stock rims..

What do people get away with 15/20mm??

Obviously will be hubbcentric spacers just looking at what peole run without any issues..after these fitted I shall be getting a set up at TGM.

Cheers

 

[bxlheathsupra]

20 rear was a nice snug fit

Sent from my SM-A320FL using Tapatalk

 

[Jamesdelll]

Thanks and no rubbing etc??

 

[S'arrt]

Hi There,

15mm spacers will be totally risk free - 20mm I would say come at risk of rubbing.

I used to be on Eibach pro kit springs, but am now on coilovers and probably only a few mm lower.

I have this setup: coilovers, eibach camber arms and bolts, a TGM FRSU, stock rims, AD08R 215 tyres (quite square edged), unrolled arches and 15mm spacers.

I didn't want to risk rubbing - TGM recommended I go for 15mm spacers. I did and it never rubs.

Under heavy load (especially if in future you go for coilovers and lower) TGM recommended against 20mm for me as it will 'risk' rubbing.

On just springs.. you might be okay. Rolling arches or a more aggressive camber is always an option, but I didn't want either.

Hope this helps a bit.

 

[Jamesdelll]

That‘s great thanks for the kind reply! Cheers

 

[bxlheathsupra]

Thanks and no rubbing etc??

Ah actually sorry i did roll my arches because i had 225 45 17s on, but my 215 40 track tyres were no issue atall.



Sent from my SM-A320FL using Tapatalk

 

[Britz]

I got 15mm spacers with eibach pro springs and they fit perfectly no rubbing etc

 

[Jamesdelll]

Thanks 15mm it is!