Squeaking Noise @ 2K

[andyd]

After doing two very long distance runs in the car

Its decided to start making an squeaking noise from what i think is the drives side of the car.

It only does it iirc 2K rev's its on the move as well as stationary.

Has any one got any idea or had this happen before?

Cheers

Andy

 

[Suped]

is the squeaking noise coming under cornering load or striaght line load??

 

[SpaceMonkey]

Engine mount possibly?

 

[andyd]

is the squeaking noise coming under cornering load or striaght line load??

I did say it done it when it was stationary or on the move.. :lol:

Andy

 

[andyd]

Engine mount possibly?

Nope check that.

Just checked with tom, its WD-40 time.

Fingers crossed its just a dry belt 8)

Andy

 

[BadBadtz]

Sounds like one of the pump or pulley bearings. Does it disappear when you rev the engine slightly?

 

[Suped]

Fingers crossed its not the air-con solenoid!!! :shock:

 

[andyd]

Sounds like one of the pump or pulley bearings. Does it disappear when you rev the engine slightly?

Yes it does go away.

Its only @ spot on 2k its makes this noise. :shock:

Andy

 

[andyd]

solenoid!!! :shock:

You mean pump ?


I've got a spare one though... :lol:

Andy

 

[andyd]

No its not that....

I've just checked. :? :?

Andy

 

[kingston]

Making the same random noises as mine?

 

[Suped]

does the squeak come to any association with gear changing??

 

[Suped]

solenoid!!! :shock:

You mean pump ?


I've got a spare one though... :lol:

Andy

no, I meant solenoid. Its what connects the belt to the air con pump sitting behind the clutch wheel. Just taking this out as a possibility.

 

[andyd]

solenoid!!! :shock:

You mean pump ?


I've got a spare one though... :lol:

Andy

no, I meant solenoid. Its what connects the belt to the air con pump sitting behind the clutch wheel. Just taking this out as a possibility.

No its not that.

I think its around the manifold area :S

Andy

 

[andyd]

fixed 8)

Andy

 

[dotty]

fixed 8)

Andy

What was it mate?

 

[Suped]

found a mouse in stuck in the mani..!! :lol:

 

[andyd]

fixed 8)

Andy

What was it mate?

Snapped Bolt on a heat sheld.

Then the bolt snapped in the manifold getting it off.

So i've replaced it with a complete Spoon manifold 4-2 and 2-1 parts.

Andy

 

[MilanoChris]

fixed 8)

Andy

What was it mate?

Snapped Bolt on a heat sheld.

Then the bolt snapped in the manifold getting it off.

So i've replaced it with a complete Spoon manifold 4-2 and 2-1 parts.

Andy

Boooo hissssssss :!:

Spoon parts on a Mugen car :lol:

:wink:

 

[andyd]

fixed 8)

Andy

What was it mate?

Snapped Bolt on a heat sheld.

Then the bolt snapped in the manifold getting it off.

So i've replaced it with a complete Spoon manifold 4-2 and 2-1 parts.

Andy

Boooo hissssssss :!:

Spoon parts on a Mugen car :lol:

:wink:

LOL


I've not got a spare 1500 quid @ the mo :lol:

Andy