Torque Steer

[ljcharm]

How much torque steer can one expect from a 250bhp N/a integ. Mine seems to be quite bad, pulling mainly to the right...

The car has the following:

Meister R Coilovers
- SuperPro Front Caster Correction Kit
- Full Hard Race Drop Link Set
- DME Rear Camber Arms
- Eibach Front Camber Bolts
- OEM Alloys in Anthracite, excellent condition no kerbing and wrapped in RE070's with plenty of tread
- Fast road setup

 

[TonksyDC5]

Sounds silly and you probably have checked, but tyre pressures?

 

[Dan34]

Check the alignment.

 

[beppe786]

standard diff?? at 300bhp mines didn't torque steer..

at high speed is your car stable? reason i ask is that i had a dc5 which had a bent hub and was similar symptoms

worth a check get a DTI gauge on the hubs

 

[integraleo]

Zero torque steer here too again 300+hp

 

[k20_irf]

Hpi check wouldn't go a miss aswell. . Could of been hit and bent something

 

[shane_blueteg]

Happened on my fd2 and it was because the two front tyres had different tread depths. Put backs on front which were even. All sorted

 

[ljcharm]

Adjusted the tyre pressure to correct psi and seems to have made an improvement


Sent from my iPhone using Tapatalk