T tomreis48 Member Messages 16 Oct 12, 2007 #1 I have changed the wheels on my dc5 to 18" and now it pulls to the right when i boot it! straight as an arrow with no throttle. Does anyone know the tracking settings to cater for my new size wheels??
I have changed the wheels on my dc5 to 18" and now it pulls to the right when i boot it! straight as an arrow with no throttle. Does anyone know the tracking settings to cater for my new size wheels??
M martyndc5 Member Messages 24 Oct 14, 2007 #2 18" rims i have also done the same,put 18,s on,pulls to the right under acceleration,goes straight off throttle,anyone got settings??
18" rims i have also done the same,put 18,s on,pulls to the right under acceleration,goes straight off throttle,anyone got settings??
C celox performance Advanced Member Messages 1,536 Oct 15, 2007 #3 It sounds like your tracking has been out on the old tyres. This will cause your car to pull when you put a set of new tyres on. The setting you want are as follows: Front Toe= 1mm toe out Rear Toe= 1mm toe in This will give your car better handling than the standard settings . 1mm of toe is NOT the same as 1 degree though.
It sounds like your tracking has been out on the old tyres. This will cause your car to pull when you put a set of new tyres on. The setting you want are as follows: Front Toe= 1mm toe out Rear Toe= 1mm toe in This will give your car better handling than the standard settings . 1mm of toe is NOT the same as 1 degree though.