Which induction hose are you guys using with your RBC?

[lujamil]

Just a quick question, which induction hose are you guys using with your RBC inlets?

I have a RBC with 70mm TB and a topfuel induction kit. Currently I am using a Tegiwa hose, but the fitting is poor (the hose bends, and therefore there is a lack of air getting to the engine).


Thanks in advance. =]

 

[dc5ian]

samco

 

[dotty]

Sfs

 

[Mark_teg]

Sfs here too. Fits fine, no cutting like I hear some people have done..

 

[dotty]

Sfs here too. Fits fine, no cutting like I hear some people have done..

Depends what airbox.. Certainly needs a slight trim with the Arc.

 

[Modmedia]

Just fitted my RBC.. I have a Samco hose, slightly cut combined with a Gruppe-M Induction kit works fine.

 

[Alex_Wilson]

I have a SFS hose on my RBC which goes to a Tegiwa M intake.

Slight kink in the hose underneath so it needs cutting a little bit.

 

[lujamil]

I need to cut my hose I think, from the induction kit side (although there's not much there to cut), because my pipe bends slightly causing the diameter to reduce leading to a lack of air reaching the engine. I've temporarily fixed it by modifying the way my induction kit is sitting but will fix it properly once my exams are over! Can't wait -____-